Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR PACKAGE TRAY SPEAKER
RM33C0E _56 Audio / Visual / Telematics _065450 AUDIO / VIDEO _0333629 REAR PACKAGE TRAY SPEAKER G

AUDIO / VIDEO  REAR PACKAGE TRAY SPEAKER  INSPECTION  


PROCEDURE

Hide 86160B 1.INSPECT REAR PACKAGE TRAY SPEAKER

a.

With the speaker installed, check that there is no looseness or other abnormalities.


b.

Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.


c.
E219304C25
2.427,2.615 2.01,2.021 false 2.01,2.583 1.813,2.042 false 1.417,2.594 1.604,2.031 false 0.875,2.594 1.385,2.021 false 2.406,2.646 3.021,2.844 0.615,0.198 10 false WF2- 1.833,2.646 2.448,2.844 0.615,0.198 10 false WF2+ 1.229,2.646 1.865,2.844 0.635,0.198 10 false WF1- 0.625,2.625 1.26,2.823 0.635,0.198 10 false WF1+ 0.156,0.146 0.469,0.344 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Package Tray Speaker)


Measure the resistance of the speaker.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (WF2-) - 2 (WF2+) Always 4.2 to 6.4 Ω
3 (WF1-) - 4 (WF1+) Always 4.2 to 6.4 Ω


If the result is not as specified, replace the speaker.