Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER
RM33C0E _56 Audio / Visual / Telematics _065450 AUDIO / VIDEO _0333635 NOISE FILTER A

AUDIO / VIDEO  NOISE FILTER  INSTALLATION  


PROCEDURE

Hide 86011R 1.INSTALL RADIO SETTING CONDENSER (for Window Defogger)

a.
E183101

Engage the claw to install a new terminal cover to the wire harness.

NOTICE:
·

Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

·

Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

·

Do not use excessive force when inserting the wire harness into the terminal cover.

·

If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.




b.
E365959C03
0,0 0,0 false
V113147

Install in this Direction


Engage the 3 claws to install the new terminal cover with wire harness to a new condenser as shown in the illustration.

NOTICE:
·

Do not use excessive force when inserting the terminal cover into the condenser.

·

If the terminal cover has been deformed during installation, replace the terminal, terminal cover and condenser with new ones.




c.

Engage the clamp to temporarily install a new radio setting condenser with wire harness.


d.

Install the new radio setting condenser with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 86011V 2.INSTALL RADIO SETTING CONDENSER (for High Mounted Stop Light)

a.
E226085

Engage the claw to install a new terminal cover to the wire harness.

NOTICE:
·

Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

·

Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

·

Do not use excessive force when inserting the wire harness into the terminal cover.

·

If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.



HINT:

Use the same procedure for the other terminal cover.



b.
E368798C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 6 claws to install 2 new terminal covers with wire harness to a new condenser as shown in the illustration.

NOTICE:
·

Do not use excessive force when inserting the terminal covers into the condenser.

·

If a terminal cover has been deformed during installation, replace the terminal, terminal covers and condenser with new ones.




c.
E365961C03
0,0 0,0 false
V113147

Install in this Direction


Insert the cover as shown in the illustration and engage the claw.


d.

Engage the clamp to temporarily install the new radio setting condenser with wire harness.


e.

Install the new radio setting condenser with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 62472A 3.INSTALL INNER ROOF SIDE GARNISH LH

Hide 4.INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

Hide 62332A 5.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Fold Down Seat Type)

Hide 72693 6.INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

Hide 7.INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

Hide 73350C 8.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type)

Hide 9.INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Reclining Seat Type)

Hide 62332A 10.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH (for Reclining Seat Type)

Hide 11.INSTALL REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type)

Hide 72996A 12.INSTALL REAR SEATBACK COVER (for Reclining Seat Type)

Hide 72693 13.INSTALL REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)

Hide 14.INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)

Hide 73350C 15.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Reclining Seat Type)

Hide 71940A 16.INSTALL REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)

Hide 17.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

Hide 64718C 18.INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Rear Seat Side Airbag)

Hide 19. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Rear Seat Side Airbag)

Hide 20.INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)