Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM33C0E _58 Vehicle Interior _065455 DOOR LOCK _0333663 POWER DOOR LOCK CONTROL SYSTEM W

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Door Lock.


v.

Select the setting by referring to the table below.

Door Lock
Tester Display Description Default Setting ECU
Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON*1
OFF*2
0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock Function that locks all doors when the vehicle reaches a certain speed.*3 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock/Shift Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed*3 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Unlock/Shift Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG)*3 ON or OFF*4 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
All Unlock/Open-Close Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the power switch being turned off*3 OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 2

*1: w/ Canister Pump Module

*2: w/o Canister Pump Module

*3: w/ Auto Lock Function

*4: Default setting differs depending on the country.




b.

Customizing with the multi-display

i.

Turn the power switch on (IG).


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings. (Type A)


iii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Door lock settings. (Type B)


iv.

Select the setting by referring to the table below.

Display Description Default Setting Relevant ECU
Speed sensitive auto locking Function that locks all doors when the vehicle reaches a certain speed.*1 ON On or Off Main body ECU (Multiplex network body ECU)
Auto lock by shift from P Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed*1 OFF On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by shift to P Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG)*1 ON or OFF*2 On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by driver door Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the power switch being turned off*1 OFF On or Off Main body ECU (Multiplex network body ECU)
Unlock on second key turn Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON*3
OFF*4
On or Off Main body ECU (Multiplex network body ECU)

*1: w/ Auto Lock Function

*2: Default setting differs depending on the country.

*3: w/ Canister Pump Module

*4: w/o Canister Pump Module