64610
1.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
Check the operation of the door lock motor.
| *a | Close (Lock) |
| *b | Open (Unlock) |
| *c | Component without harness connected
(Luggage Compartment Door Lock Assembly) |
Move the door lock to the close (lock) position.
Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.
| Auxiliary Battery Connection | Result |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
Luggage compartment door lock motor open (unlock) operation |
If the result is not as specified, replace the luggage compartment door lock assembly.
Check the operation of the luggage compartment door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 - 3 | Closed (Locked) | 10 kΩ or higher |
| 2 - 3 | Open (Unlocked) | Below 1 Ω |
If the result is not as specified, replace the luggage compartment door lock assembly.