76865B
1.INSTALL REAR SPOILER RETAINER
When installing a new rear spoiler retainer, heat the luggage compartment door panel and rear spoiler retainer using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Rear Spoiler Retainer | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door panel or rear spoiler retainer excessively.
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
|
Primer |
Using a brush or felt, apply primer or equivalent to the rear spoiler retainer installation area.
Use a clean brush or felt.
Do not touch the luggage compartment door panel until the primer has dried.
Remove the release paper from a new rear spoiler retainer.
Engage the 3 guides and attach the double-sided tape to install the rear spoiler retainer.
Press the rear spoiler retainer firmly to install it.
Install the rear spoiler retainer with the 6 clips.
76085
2.INSTALL REAR SPOILER SUB-ASSEMBLY
When installing a new rear spoiler sub-assembly, heat the luggage compartment door panel and rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door Panel | 40 to 60°C (104 to 140°F) |
| Rear Spoiler Sub-assembly | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the luggage compartment door panel or rear spoiler sub-assembly excessively.
Clean the luggage compartment door panel surface.
Using a heat light, heat the luggage compartment door panel surface.
Remove any double-sided tape from the luggage compartment door panel.
Wipe off any tape adhesive residue with cleaner.
|
Primer |
Using a brush or felt, apply primer or equivalent to the rear spoiler sub-assembly installation area.
Use a clean brush or felt.
Do not touch the luggage compartment door panel until the primer has dried.
Remove the release paper from a new rear spoiler sub-assembly.
Attach the double-sided tape to install the rear spoiler sub-assembly.
Press the rear spoiler sub-assembly firmly to install it.
Install the rear spoiler sub-assembly with the 2 bolts.
64719A
3.INSTALL LUGGAGE COMPARTMENT DOOR COVER