Home › General › MAINTENANCE › FRONT WIPER RUBBER
RM33C0E _V1 General _065432 MAINTENANCE _0334211 FRONT WIPER RUBBER A

MAINTENANCE  FRONT WIPER RUBBER  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.


HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 85214B 1.INSTALL WIPER RUBBER

a.
E370249C01
0,0 0,0 false
V113147

Install in this Direction


Install the 2 front wiper rubber backing plates to the wiper rubber.

NOTICE:
·

Align the protrusions on the wiper rubber and the notches of the backing plates.

·

Align the curves of the backing plates and the windshield glass.




b.
E370250C01
0,0 0,0 false
V113147

Install in this Direction


Install the wiper rubber with the front wiper rubber backing plates to the front wiper blade as shown in the illustration.

NOTICE:

Push the wiper rubber and front wiper backing plates into the front wiper blade strongly to engage them securely.



Hide 85222A 2.INSTALL FRONT WIPER BLADE

a.
E370245C01
0,0 0,0 false
V113147

Install in this Direction


Install the front wiper blade to the front wiper arm as shown in the illustration.


b.
E370244C01
1.667,1.552 1.323,1.188 true 1.896,3.948 1.552,3.583 true 1.688,1.563 2,1.719 0.313,0.156 10 false *a 1.906,3.969 2.219,4.125 0.313,0.156 10 false *a
*a Holder
V113147

Install in this Direction


Pull down the holder of the front wiper blade.


c.

Turn the power switch on (IG).


d.

Operate the windshield wiper switch assembly to return the front wiper arm and blade assemblies to their original position.


e.

Turn the power switch off.