Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)
RM33C0E _55 Steering _065448 STEERING COLUMN _0334238 STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column) A

STEERING COLUMN  STEERING COLUMN ASSEMBLY(for Manual Tilt and Manual Telescopic Steering Column)  REASSEMBLY  


PROCEDURE

Hide 45020B 1.INSTALL STEERING LOCK ACTUATOR ASSEMBLY

NOTICE:

When replacing the steering lock actuator assembly, perform registration.


a.

Secure the steering column assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Temporarily install the steering lock actuator and upper steering column clamp with 2 new steering lock set bolts.


c.
C378538

Tighten the 2 steering lock set bolts until the bolt head breaks off.