Home › Steering › STEERING COLUMN › TILT AND TELESCOPIC MANUAL SWITCH
RM33C0E _55 Steering _065448 STEERING COLUMN _0334242 TILT AND TELESCOPIC MANUAL SWITCH A

STEERING COLUMN  TILT AND TELESCOPIC MANUAL SWITCH  INSTALLATION  


PROCEDURE

Hide 89235A 1.INSTALL TILT AND TELESCOPIC SWITCH

a.

Engage the claw to install the tilt and telescopic switch.


b.

Connect the tilt and telescopic connector to the tilt and telescopic switch.


c.

Connect the spiral cable connector to the spiral cable sub-assembly.


Hide 45024 2.INSTALL LOWER STEERING COLUMN COVER SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>AUXILIARY BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 5. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM