Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › 2017.12–2021.02
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0328967 DYNAMIC RADAR CRUISE CONTROL SYSTEM C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  U0125  Lost Communication with Yaw Rate Sensor Module  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0293  Lost Communication with Hybrid Vehicle Control System  


DESCRIPTION

The millimeter wave radar sensor assembly communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0125 Lost Communication with Yaw Rate Sensor Module w/o Full-speed Range Following Function:
·

While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the yaw rate and acceleration sensor (airbag sensor assembly) and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


w/ Full-speed Range Following Function:
·

While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the yaw rate and acceleration sensor (airbag sensor assembly) and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


·

CAN communication system

·

Yaw rate and acceleration sensor (airbag sensor assembly)

·

Millimeter wave radar sensor assembly


U0126 Lost Communication with Steering Angle Sensor Module w/o Full-speed Range Following Function:
·

While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the steering sensor and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


w/ Full-speed Range Following Function:
·

While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the steering sensor and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


·

CAN communication system

·

Steering sensor

·

Millimeter wave radar sensor assembly


U0129 Lost Communication with Brake System Control Module w/o Full-speed Range Following Function:
·

While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the skid control ECU (brake booster with master cylinder assembly) and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


w/ Full-speed Range Following Function:
·

While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the skid control ECU (brake booster with master cylinder assembly) and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


·

CAN communication system

·

Skid control ECU (brake booster with master cylinder assembly)

·

Millimeter wave radar sensor assembly


U0293 Lost Communication with Hybrid Vehicle Control System w/o Full-speed Range Following Function:
·

While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the hybrid vehicle control ECU assembly and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


w/ Full-speed Range Following Function:
·

While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the hybrid vehicle control ECU assembly and millimeter wave radar sensor assembly is detected for approximately 0.1 seconds or more.


·

CAN communication system

·

Hybrid vehicle control ECU assembly

·

Millimeter wave radar sensor assembly



PROCEDURE

1.CHECK FOR DTCs
a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 197

b.

Perform the following procedure.

HINT:

If the following procedure is not performed, the previously output DTC cannot be detected.

1.

Turn the power switch on (IG).

2.

Turn the dynamic radar cruise control system on using the cruise control main switch.

3.

w/o Full-speed Range Following Function: Drive the vehicle at 36 km/h (22 mph) or more for 1 second or more.

w/ Full-speed Range Following Function: Drive the vehicle at 5 km/h (3 mph) or more for 1 second or more.




c.

Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes
50001 197

Result:
Result Proceed to
DTC U0125, U0126, U0129 and U0293 are not output A
DTC U0125, U0126, U0129 or U0293 is output B



A

B