Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY › from 2017.12
RM33C0E _58 Vehicle Interior _065458 METER / GAUGE / DISPLAY _0330020 HEADUP DISPLAY A

METER / GAUGE / DISPLAY  HEADUP DISPLAY  REASSEMBLY  


PROCEDURE

Hide 83163 1.INSTALL NO. 1 COMBINATION METER MIRROR PLATE

a.
E371523C03
1.365,1.938 1.885,1.615 true 1.156,1.875 1.469,2.031 0.313,0.156 10 false *1
*1 Light Sensor Assembly


Connect the light sensor assembly with the screw.


b.
E371522C02
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws as shown in the illustration.


c.
E371520

Install the No. 1 combination meter mirror plate with the 8 screws.


Hide 83847A 2.INSTALL COMBINATION SPEED METER CUSHION

a.

Clean the meter mirror sub-assembly surface.

i.

Remove any remaining double-sided tape from the meter mirror sub-assembly.


ii.

Wipe off any tape adhesive residue with cleaner.



b.

Remove the release paper from a new combination speed meter cushion.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



c.
E371519C03
0,0 0,0 false
V100155

Double-sided Tape


Install the combination speed meter cushion.


Hide 83847 3.INSTALL NO. 1 COMBINATION SPEED METER CUSHION

a.

Clean the meter mirror sub-assembly surface.

i.

Remove any remaining double-sided tape from the meter mirror sub-assembly.


ii.

Wipe off any tape adhesive residue with cleaner.



b.

Remove the release paper from a new No. 1 combination speed meter cushion.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



c.
E371518C03
0,0 0,0 false
V100155

Double-sided Tape


Install the No. 1 combination speed meter cushion.


Hide 82149C 4.INSTALL METER MIRROR WIRE

a.
E371517

Engage the 2 clamps.


b.

Connect the connector to install the meter mirror wire.