Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › 2017.12–2018.04
RM33C0E _59 Vehicle Exterior _065472 LIGHTING (EXT) _0330497 REAR LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81550N 1.REMOVE BACK-UP LIGHT BULB (for Bulb Type Back-up Light)

a.
E378075C01
0,0 0,0 false
V113147

Disconnect in this Direction


Turn the rear light socket plug with the back-up light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the back-up light bulb from the rear light socket plug.


Hide 81580F 2.REMOVE REAR LIGHT SOCKET PLUG (for Bulb Type Back-up Light)

Hide 81585F 3.REMOVE REAR LIGHT CORD (for LED Type Back-up Light)

a.
E371343

Disconnect the connector to remove the rear light cord.


Hide 81594B 4.REMOVE REAR LIGHT PACKING

a.

for Bulb Type Back-up Light:

i.
E378077

Remove the rear light packing.

NOTICE:
·

Be sure to remove all traces of the old rear light packing from the vehicle body.

·

Do not reuse the removed rear light packing. Be sure to install a new rear light packing to prevent water ingress.





b.

for LED Type Back-up Light:

i.
E371344

Remove the rear light packing.

NOTICE:
·

Be sure to remove all traces of the old rear light packing from the vehicle body.

·

Do not reuse the removed rear light packing. Be sure to install a new rear light packing to prevent water ingress.





Hide 81591B 5.REMOVE REAR LIGHT LENS AND BODY (for Bulb Type Back-up Light)