Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81591B
1.INSTALL REAR LIGHT LENS AND BODY (for Bulb Type Back-up Light)
81594B
2.INSTALL REAR LIGHT PACKING
for Bulb Type Back-up Light:
Install a new rear light packing.
for LED Type Back-up Light:
Install a new rear light packing.
81580F
3.INSTALL REAR LIGHT SOCKET PLUG (for Bulb Type Back-up Light)
81585F
4.INSTALL REAR LIGHT CORD (for LED Type Back-up Light)
Connect the connector to install the rear light cord.
81550N
5.INSTALL BACK-UP LIGHT BULB (for Bulb Type Back-up Light)
Install the back-up light bulb to the rear light socket plug.
|
Install in this Direction |
Turn the rear light socket plug with the back-up light bulb as shown in the illustration to install them as a unit.