Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT › from 2017.12
RM33C0E _58 Vehicle Interior _065457 LIGHTING (INT) _0330223 ROOM LIGHT A

LIGHTING (INT)  ROOM LIGHT  REMOVAL  


PROCEDURE

Hide 81240J 1.REMOVE ROOM LIGHT ASSEMBLY (for Bulb Type)

a.
E364943C01
2.156,0.385 2.479,0.823 true 1.927,0.271 2.24,0.427 0.313,0.156 10 true *a
*a Protective Tape
V100136

Front


Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.


b.
E364944C01
2.438,0.802 2.188,0.385 true 1.958,0.26 2.271,0.417 0.313,0.156 10 true *a
*a Protective Tape
V100136

Front
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the room light housing.


c.
E364945C01
1.885,1.125 2.135,0.885 true 2.167,0.802 2.479,0.958 0.313,0.156 10 true *1
*1 Room Light Switch Base


Disengage the clamp.


d.

Disengage the 4 claws to disconnect the room light switch base from the room light housing.


Hide 81310B 2.REMOVE REAR ROOM LIGHT BULB (for Bulb Type)

a.

Remove the rear room light bulb from the room light switch base.


Hide 81360T 3.REMOVE SPOT LIGHT ASSEMBLY (for LED Type)

a.
E378721C01
0,0 0,0 false
V100136

Front


Using a moulding remover, disengage the 8 claws.


b.

Disconnect the connector to remove the spot light assembly.