Home › General › MAINTENANCE › REAR TURN SIGNAL LIGHT BULB › from 2017.12
RM33C0E _V1 General _065432 MAINTENANCE _0341623 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire.


b.
E387733C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to install them as a unit.


Hide 81560 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY

a.
E364996C01
0.479,0.958 0.896,0.958 true 0.448,1.458 1.167,1.083 true 1.417,1.438 2.833,0.854 2.833,0.854 2.167,1.417 true 0.281,1.365 0.594,1.521 0.313,0.156 10 false *a 0.313,0.844 0.625,1 0.313,0.156 10 false *b 2.865,0.75 3.177,0.906 0.313,0.156 10 false *b
*a Pin
*b Guide
V113147

Install in this Direction


Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.


b.

Install the rear combination light assembly with the 2 screws.


c.

Remove the protective tape.


Hide 81498 3.INSTALL REAR COMBINATION LIGHT COVER