Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › from 2017.12
RM33C0E _58 Vehicle Interior _065457 LIGHTING (INT) _0330219 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  SYSTEM DESCRIPTION  


ILLUMINATED ENTRY SYSTEM


a.

The illuminated entry system has the following control functions:

Control Outline Lights that Operate
Actuation Area-linked When a registered key is brought within any vehicle exterior detection area around the doors, the lights that operate turn on.
·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


Door Lock/Unlock-linked When any door is unlocked, the lights that operate turn on.
·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


When all doors are locked, the lights that operate turn off.
Door Open/Close-linked When any door is opened, the lights that operate turn on.
·

Power Switch Illumination

·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


When all doors are closed, the lights that operate turn off.
Power Switch-linked When the power switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on.
·

Power Switch Illumination

·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


When the power switch is turned from off to on (ACC) or on (IG), the lights that operate turn off.
·

Power Switch Illumination

·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2


Shift Position-linked When the shift lever is moved from P to any other position, the lights that operate dim.
·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


Delay When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

An actuation area-linked function is used.

·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the power switch is off.

·

The power switch is turned from on (ACC) or on (IG) to off when all doors are closed.


·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


When approximately 40 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

Any door is opened and then all doors are closed when the power switch is off.

·

The power switch is turned from on (ACC) or on (IG) to off when all doors are closed.


Power Switch Illumination

*1: w/ Room Light (for LED Type)

*2: w/ Room Light (for Bulb Type)

*3: w/ Footwell Light

*4: w/ Front Door Inside Handle Illumination Light

*5: w/ Rear Door Inside Handle Illumination Light

*6: w/ Instrument Panel Ambient Illumination Light




BATTERY SAVING CONTROL SYSTEM


a.

The battery saving function has the following control functions:

Control Condition Lights that Operate
Basic operation When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.
HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

·

The power switch is turned on (ACC) or on (IG).

·

Any door is opened and closed.

·

The luggage compartment door is opened and closed.

·

Any door is unlocked.

·

The key enters any exterior actuation area.



·

Power Switch Illumination

·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Footwell Light (No. 1 Interior Illumination Light Assembly)*3

·

Front Door Inside Handle Illumination Light (No. 1 Interior Illumination Light Assembly)*4

·

Rear Door Inside Handle Illumination Light (No. 2 Interior Illumination Light Assembly)*5

·

Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly)*6


Interior light auto cut operation When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.
HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

·

The power switch is turned on (ACC) or on (IG).



·

Map Light (Roof Console Box Sub-assembly)*1

·

Spot Light Assembly*1

·

Room Light Assembly*2

·

Vanity Light Assembly

·

No. 1 Luggage Compartment Light Assembly

·

Courtesy Light Assembly*7



*1: w/ Room Light (for LED Type)

*2: w/ Room Light (for Bulb Type)

*3: w/ Footwell Light

*4: w/ Front Door Inside Handle Illumination Light

*5: w/ Rear Door Inside Handle Illumination Light

*6: w/ Instrument Panel Ambient Illumination Light

*7: w/ Courtesy Light