81560
1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for Bulb Type Back-up Light)
| *a | Component without harness connected
(Rear Combination Light Assembly LH) |
Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TL)
Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminate |
| Auxiliary battery positive (+) → Terminal 2 (STP)
Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light assembly LH.
81560
2.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for LED Type Back-up Light)
| *a | Component without harness connected
(Rear Combination Light Assembly LH) |
Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TL)
Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate |
| Auxiliary battery positive (+) → Terminal 2 (STP)
Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
| Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates |
If the result is not as specified, replace the rear combination light assembly LH.
81550
3.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for Bulb Type Back-up Light)
| *a | Component without harness connected
(Rear Combination Light Assembly RH) |
Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TL)
Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight illuminate |
| Auxiliary battery positive (+) → Terminal 2 (STP)
Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light assembly RH.
81550
4.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for LED Type Back-up Light)
| *a | Component without harness connected
(Rear Combination Light Assembly RH) |
Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TL)
Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate |
| Auxiliary battery positive (+) → Terminal 2 (STP)
Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates |
| Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates |
If the result is not as specified, replace the rear combination light assembly RH.
81536A
5.INSPECT REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)
| *a | Component without harness connected
(Rear Combination Light LED) |
Apply auxiliary battery voltage to the rear combination light LED and check that the lights illuminate.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1 (TL)
Auxiliary battery negative (-) → Terminal 2 (E) |
Taillight illuminates |
| Auxiliary battery positive (+) → Terminal 3 (STP)
Auxiliary battery negative (-) → Terminal 2 (E) |
Stop light illuminates |
If the result is not as specified, replace the rear combination light LED.