Home › Vehicle Exterior › LIGHTING (EXT) › HEIGHT CONTROL SENSOR › from 2017.12
RM33C0E _59 Vehicle Exterior _065472 LIGHTING (EXT) _0330508 HEIGHT CONTROL SENSOR A

LIGHTING (EXT)  HEIGHT CONTROL SENSOR  INSTALLATION  


PROCEDURE

Hide 89408C 1.INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

NOTICE:

If the rear height control sensor sub-assembly LH has been struck or dropped, replace it with a new one.


a.

Engage the 2 guides.


b.

Install the rear height control sensor sub-assembly LH with the 2 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.

Connect the connector.


Hide 2.INSTALL REAR WHEEL (for LH Side)