Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM MAIN SWITCH › from 2017.12
RM33C0E _59 Vehicle Exterior _065472 LIGHTING (EXT) _0330505 AUTOMATIC HIGH BEAM MAIN SWITCH A

LIGHTING (EXT)  AUTOMATIC HIGH BEAM MAIN SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD side and LHD side.

·

The following procedure is for the LHD side.



PROCEDURE

Hide 55435B 1.REMOVE NO. 1 METER HOOD CLUSTER (w/o Driver Side Knee Airbag)

Hide 55434B 2.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (w/o Driver Side Knee Airbag)

Hide 67914 3.REMOVE FRONT DOOR SCUFF PLATE LH

Hide 62112A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 62312B 5.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 55318C 6.REMOVE INSTRUMENT SIDE PANEL LH

Hide 55606 7.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55606 8.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Hide 55436B 9.REMOVE NO. 2 METER HOOD CLUSTER

Hide 53601 10.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55302D 11.REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

Hide 55302D 12.REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)

Hide 84153 13.REMOVE AUTO HIGH BEAM SWITCH

a.

for LHD:

i.
E365641C01
1.313,0.417 1.76,0.719 true 1.146,0.323 1.458,0.479 0.313,0.156 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the auto high beam switch as shown in the illustration.



b.

for RHD:

i.
E371332C01
1.677,0.875 2.094,0.458 true 2.135,0.375 2.448,0.531 0.313,0.156 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the auto high beam switch as shown in the illustration.