Home › Vehicle Exterior › HORN › HORN › from 2018.04
RM33C0E _59 Vehicle Exterior _065473 HORN _0327506 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY (for Type A)

a.
E372462C01
1.031,1.375 1.594,1.625 false 1.052,0.292 1.354,0.417 false 0.125,0.073 0.438,0.271 0.313,0.198 10 false *a 0.823,0.167 1.135,0.365 0.313,0.198 10 false *b 1.656,1.563 1.969,1.76 0.313,0.198 10 false 1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY (for Type A)

a.
E372463C01
1.052,0.292 1.354,0.427 false 1.031,1.385 1.448,1.656 false 0.115,0.083 0.427,0.281 0.313,0.198 10 false *a 0.844,0.167 1.156,0.365 0.313,0.198 10 false *b 1.521,1.646 1.833,1.844 0.313,0.198 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.


Hide 86510 3.INSPECT HIGH PITCHED HORN ASSEMBLY (for Type B)

a.
E331514C02
1.031,0.219 1.375,0.26 false 1.26,0.99 1.719,0.802 false 0.094,0.083 0.417,0.302 0.323,0.219 10 false *a 0.844,0.125 1.198,0.417 0.354,0.292 10 false *b 1.781,0.719 2.031,1.031 0.25,0.313 10 false 1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 4.INSPECT LOW PITCHED HORN ASSEMBLY (for Type B)

a.
E331515C03
1.094,0.281 1.385,0.302 false 1.281,1.031 1.75,0.74 false 0.083,0.125 0.417,0.396 0.333,0.271 10 false *a 0.885,0.177 1.24,0.417 0.354,0.24 10 false *b 1.813,0.635 2.042,0.927 0.229,0.292 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body Ground


Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.