84927
1.INSPECT SEAT MEMORY SWITCH (DRIVER DOOR)
| *A | for LHD |
| *B | for RHD |
| *a | SET Switch |
| *b | M1 Switch |
| *c | M2 Switch |
| *d | Component without harness connected
(Seat Memory Switch (Driver Door)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the seat memory switch (driver door). |
||
| 2 - 1 | M1 switch pressed | Below 1 Ω |
| M1 switch not pressed | 10 kΩ or higher | |
| 5 - 1 | M2 switch pressed | Below 1 Ω |
| M2 switch not pressed | 10 kΩ or higher | |
| 3 - 1 | SET switch pressed | Below 1 Ω |
| SET switch not pressed | 10 kΩ or higher | |