Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE PROXIMITY NOTIFICATION SYSTEM (w/ Vehicle Approaching Speaker Switch) › 2018.08–2020.08
RM33C0E _59 Vehicle Exterior _074891 VEHICLE PROXIMITY NOTIFICATION SYSTEM _0363660 VEHICLE PROXIMITY NOTIFICATION SYSTEM(w/ Vehicle Approaching Speaker Switch) W

VEHICLE PROXIMITY NOTIFICATION SYSTEM  VEHICLE PROXIMITY NOTIFICATION SYSTEM(w/ Vehicle Approaching Speaker Switch)  CUSTOMIZE PARAMETERS  


CUSTOMIZE VEHICLE PROXIMITY NOTIFICATION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS.

i.

Turn the power switch off.


ii.

Connect the GTS to the DLC3.


iii.

Turn the power switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Customize Setting / Others.


vi.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
Proximity Sound Volume Adjustment Function that sets the warning sound volume in 3 levels Standard 010:Standard,011:Standard +1,100:Standard +2 Vehicle Approaching Speaker Controller
Proximity Sound Level Increase (Vehicle Starting) Function that amplifies the warning sound when the vehicle starts off ON 0:OFF,1:ON Vehicle Approaching Speaker Controller
Proximity Sound Control (Vehicle Stationary) Function that sets the warning sound when the vehicle is stopped OFF 0:OFF,1:ON Vehicle Approaching Speaker Controller
50006 98