FUEL LID OPENER SYSTEM DESCRIPTION
When the fuel lid opener switch is pushed for 0.8 seconds, the main body ECU (multiplex network body ECU) turns on the fuel lid open relay to open the fuel lid.*1
When the fuel lid opener switch is pushed for 0.8 seconds, the internal pressure of the fuel tank is reduced and a message is displayed on the multi-information display in the combination meter assembly. When the fuel lid is opened, the fuel lid courtesy switch outputs a signal and a message is displayed on the multi-information display in the combination meter assembly.*2
*1: w/o Canister Pump Module
*2: w/ Canister Pump Module
FUNCTION OF MAIN COMPONENTS
| Item | Outline |
|---|---|
| Fuel lid opener switch | Grounds the switch monitoring circuit of the main body ECU (multiplex network body ECU) when pushed. |
| Fuel lid lock with motor assembly | ·
Opens the fuel lid via a signal from the main body ECU (multiplex network body ECU)*1. ·
Opens the fuel lid via a signal from the ECM*2. |
| Main body ECU (Multiplex network body ECU) | ·
Receives a fuel lid opener switch on signal and controls the fuel lid opener system.*1 ·
Depending on the vehicle conditions, sends a fuel lid open request to the ECM when a fuel lid opener switch on signal is received.*2 |
| ECM*2 | Controls the fuel lid opener system when a fuel lid open request is received from the main body ECU (multiplex network body ECU). |
*1: w/o Canister Pump Module
*2: w/ Canister Pump Module