CUSTOMIZE LUGGAGE COMPARTMENT DOOR OPENER SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Door Lock.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Trunk Link with Door Lock | Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked using the entry door lock function, wireless door lock function, mechanical key or door control switch.* | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
*: w/ Door Lock-linked Function
Enter the following menus: Customize Setting / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Trunk / Fuel Opener SW Operation Setting | Function that sets the luggage compartment door opening switch assembly operation.
Short: Luggage compartment door open request sent when luggage compartment door opening switch assembly pushed. Long: Luggage compartment door open request sent when luggage compartment door opening switch assembly pushed for 0.8 seconds. |
Long | 0:Short,1:Long | Main body ECU (Multiplex network body ECU) |