CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | for LHD | *B | for RHD |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| MB-11 (GND1) - Body ground | - | - | Ground | Always | Below 1 Ω | - |
| MB-30 (ACC) - Body ground | - | Input | ACC power supply | Power switch on (ACC) | 11 to 14 V | ACC SW |
| Power switch off | Below 1 V | |||||
| MB-31 (BECU) - Body ground | - | Input | Auxiliary battery power supply | Power switch off | 11 to 14 V | - |
| MB-32 (IG) - Body ground | - | Input | IG power supply | Power switch on (IG) | 11 to 14 V | IG SW |
| Power switch off | Below 1 V |
Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| K52-1 (FLCY) - Body ground | W- Body ground | Input | Front door courtesy light switch (for LH) input | Front door LH open → closed | Below 1 V → 11 to 14 V | FL Door Courtesy SW |
| K52-6 (FRCY) - Body ground | BE - Body ground | Input | Front door courtesy light switch (for RH) input | Front door RH open → closed | Below 1 V → 11 to 14 V | FR Door Courtesy SW |
| 3D-24 (LCTY) - Body ground | G - Body ground | Input | Rear door courtesy light switch (for LH) input | Rear door LH open → closed | Below 1 V → 11 to 14 V | RL Door Courtesy SW |
| 3A-31 (RCTY) - Body ground | V - Body ground | Input | Rear door courtesy light switch (for RH) input | Rear door RH open → closed | Below 1 V → 11 to 14 V | RR Door Courtesy SW |
| 3B-13 (LSFL) - Body ground | W - Body ground | Input | Front door LH unlock detection switch input | Front door LH unlocked → locked | Below 1 V → 11 to 14 V | FL Door Lock Pos |
| 3B-12 (LSFR) - Body ground | GR - Body ground | Input | Front door RH unlock detection switch input | Front door RH unlocked → locked | Below 1 V → 11 to 14 V | FR Door Lock Pos |
| 3B-14 (LSWL) - Body ground | GR - Body ground | Input | Rear door LH unlock detection switch input | Rear door LH unlocked → locked | Below 1 V → 11 to 14 V | RL-Door Lock Pos SW |
| K51-20 (LSWR) - Body ground | L - Body ground | Input | Rear door RH unlock detection switch input | Rear door RH unlocked → locked | Below 1 V → 11 to 14 V | RR-Door Lock Pos SW |
| 3D-8 (ACT-) - Body ground | R - Body ground | Output | Door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3D-9 (ACT-) - Body ground | R - Body ground | Output | Door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3D-6 (ACT+) - Body ground | B - Body ground | Output | Door lock motor lock drive output | Door control switch or driver door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3D-18 (ACT+) - Body ground | B - Body ground | Output | Door lock motor lock drive output | Door control switch or driver door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-4 (ACTD) - Body ground*1 | L - Body ground | Output | Door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-16 (L1) - Body ground*2 | LG - Body ground | Input | Door control switch assembly input | Door control switch assembly off → on (lock) | Pulse generation → Below 1 V | Door Lock SW-Lock |
| 3A-39 (UL1) - Body ground*2 | GR - Body ground | Input | Door control switch assembly input | Door control switch assembly off → on (unlock) | Pulse generation → Below 1 V | Door Lock SW-Unlock |
| K53-17 (UL3) - Body ground | BE - Body ground | Input | Driver door key-linked unlock input | Driver door key cylinder in neutral position → on (unlock) | 11 to 14 V → Below 1 V | D Door Key SW-UL |
| K53-18 (L2) - Body ground | LG - Body ground | Input | Driver door key-linked lock input | Driver door key cylinder in neutral position → on (lock) | 11 to 14 V → Below 1 V | Door Key SW-Lock |
| 3A-7 (GSW) - Body ground | B - Body ground | Input | Airbag sensor signal (collision detection signal) | Power switch on (IG) with airbag sensor assembly connector disconnected | 4.3 to 5.5 V | - |
*1: w/ Key-linked 2-step Unlock Function
*2: w/ Canister Pump Module
CHECK AIRBAG SENSOR ASSEMBLY
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>TERMINALS OF ECU