Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › from 2019.02
RM33C0E _59 Vehicle Exterior _065472 LIGHTING (EXT) _0330497 REAR LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81590A 1.INSPECT REAR LIGHT ASSEMBLY LH (for Bulb Type Back-up Light with Rear Side Marker Light)

E371639C10
0.979,1.719 1.479,1.948 true 1.979,2.417 2.479,2.646 true 0.979,2.646 1.469,2.438 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.833,1.625 1.146,1.823 0.313,0.198 10 false B 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 0.708,2.604 1.021,2.802 0.313,0.198 10 false B*A
*A w/ Rear Fog Light
*a Component without harness connected
(Rear Light Assembly LH)


a.

Apply battery voltage to the rear light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 4 (E)
Taillight illuminates
Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 4 (E)
Fog light illuminates*


*: w/ Rear Fog Light


If the result is not as specified, replace the rear light assembly LH.


Hide 81590A 2.INSPECT REAR LIGHT ASSEMBLY LH (for Bulb Type Back-up Light without Rear Side Marker Light)

E371639C17
1.979,2.417 2.479,2.646 true 0.979,2.646 1.469,2.438 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 0.708,2.604 1.021,2.802 0.313,0.198 10 false B*A
*A w/ Rear Fog Light
*a Component without harness connected
(Rear Light Assembly LH)


a.

Apply auxiliary battery voltage to the rear light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Fog light illuminates*


*: w/ Rear Fog Light


If the result is not as specified, replace the rear light assembly LH.


Hide 81590A 3.INSPECT REAR LIGHT ASSEMBLY LH (for LED Type Back-up Light)

E371639C12
0.979,1.719 1.479,1.948 true 1.979,2.417 2.479,2.646 true 0.979,2.646 1.469,2.438 true 1.979,1.948 2.469,1.74 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.833,1.635 1.146,1.833 0.313,0.198 10 false B 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 0.688,2.615 1,2.813 0.313,0.198 10 false B*A 2.521,1.635 2.833,1.833 0.313,0.198 10 false B
*A w/ Rear Fog Light
*a Component without harness connected
(Rear Light Assembly LH)


a.

Apply auxiliary battery voltage to the rear light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Taillight illuminates
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Back-up light illuminates
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Fog light illuminates*


*: w/ Rear Fog Light


If the result is not as specified, replace the rear light assembly LH.


Hide 81580D 4.INSPECT REAR LIGHT ASSEMBLY RH (for Bulb Type Back-up Light with Rear Side Marker Light)

E371639C10
0.979,1.719 1.479,1.948 true 1.979,2.417 2.479,2.646 true 0.979,2.646 1.469,2.438 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.833,1.625 1.146,1.823 0.313,0.198 10 false B 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 0.708,2.604 1.021,2.802 0.313,0.198 10 false B*A
*a Component without harness connected
(Rear Light Assembly RH)


a.

Apply battery voltage to the rear light assembly RH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 4 (E)
Taillight illuminates
Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 4 (E)
Fog light illuminates*


*: w/ Rear Fog Light


If the result is not as specified, replace the rear light assembly RH.


Hide 81580D 5.INSPECT REAR LIGHT ASSEMBLY RH (for LED Type Back-up Light)

E371639C12
0.979,1.719 1.479,1.948 true 1.979,2.417 2.479,2.646 true 0.979,2.646 1.469,2.438 true 1.979,1.948 2.469,1.74 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.833,1.635 1.146,1.833 0.313,0.198 10 false B 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 0.688,2.615 1,2.813 0.313,0.198 10 false B*A 2.521,1.635 2.833,1.833 0.313,0.198 10 false B
*a Component without harness connected
(Rear Light Assembly RH)


a.

Apply auxiliary battery voltage to the rear light assembly RH and check that the lights illuminate.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Taillight illuminates
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 4 (E)
Back-up light illuminates
Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 4 (E)
Fog light illuminates*


*: w/ Rear Fog Light


If the result is not as specified, replace the rear light assembly RH.