Home › Brake › BRAKE (FRONT) › FRONT BRAKE (for 2-Pot Caliper) › from 2019.02
RM33C0E _54 Brake _065444 BRAKE (FRONT) _0388014 FRONT BRAKE(for 2-Pot Caliper) A

BRAKE (FRONT)  FRONT BRAKE(for 2-Pot Caliper)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

Perform the removal and installation of the front disc brake piston, cylinder boot and piston seal one side at a time.


PROCEDURE

Hide 47547B 1.TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

a.

Temporarily install the front disc brake bleeder plug to the front disc brake cylinder.

HINT:

Fully tighten the front disc brake bleeder plug after bleeding the system.



Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

a.

Install the front disc brake bleeder plug cap to the front disc brake bleeder plug.


Hide 3.INSTALL PISTON SEAL

a.
C336938C08
0,0 0,0 false
V100155

Lithium Soap Base Glycol Grease


Apply lithium soap base glycol grease to the entire circumference of a new piston seal.


b.
C391966C02
0.667,0.604 0.771,0.25 0.771,0.25 0.865,0.25 false 0.885,0.823 1.01,0.823 false 1.042,0.74 1.354,0.896 0.313,0.156 10 false *1 0.906,0.188 1.219,0.344 0.313,0.156 10 false *2
*1 Piston Seal
*2 Front Disc Brake Cylinder


Install the piston seal to the front disc brake cylinder.

NOTICE:

Securely install the piston seal into the groove of the front disc brake cylinder.



Hide 47731 4.INSTALL FRONT DISC BRAKE PISTON

a.
C336939C04
0.448,0.625 0.563,0.625 0.563,0.625 0.844,0.844 false 0.49,2.115 0.729,2.115 false 0.271,0.552 0.583,0.708 0.313,0.156 10 false *1 0.313,2.042 0.625,2.198 0.313,0.156 10 false *2
*1 Cylinder Boot
*2 Front Disc Brake Piston
V100155

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.


b.

Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

NOTICE:

Do not forcibly install the front disc brake piston into the front disc brake cylinder.



c.

Install the cylinder boot to the front disc brake piston.

NOTICE:

Securely install the cylinder boot into the groove of the front disc brake piston.



Hide 5.INSTALL CYLINDER BOOT

a.
C336940C04
2.135,0.302 2.448,0.302 false 1.885,1.24 2.01,1.24 2.01,1.24 2.01,0.927 false 1.615,0.573 1.615,0.292 1.615,0.292 1.521,0.292 false 1.719,1.177 2.031,1.333 0.313,0.156 10 false *1 1.948,0.24 2.26,0.396 0.313,0.156 10 false *2 1.344,0.219 1.656,0.375 0.313,0.156 10 false *3
*1 Cylinder Boot
*2 Front Disc Brake Piston
*3 Front Disc Brake Cylinder


Install the cylinder boot to the front disc brake cylinder as shown in the illustration.

NOTICE:
·

Securely install the cylinder boot into the groove of the front disc brake cylinder and front disc brake piston.

·

Do not damage the cylinder boot.