Home › Brake › BRAKE (FRONT) › FRONT BRAKE (except 2-Pot Caliper) › from 2019.02
RM33C0E _54 Brake _065444 BRAKE (FRONT) _0388074 FRONT BRAKE(except 2-Pot Caliper) A

BRAKE (FRONT)  FRONT BRAKE(except 2-Pot Caliper)  DISASSEMBLY  


PROCEDURE

Hide 47731 1.REMOVE FRONT DISC BRAKE PISTON

a.
C406368C01
0.51,1.802 0.719,1.802 0.719,1.802 0.969,1.365 false 0.323,1.708 0.635,1.906 0.313,0.198 10 false *a
*a Cloth


Place a piece of cloth between the front disc brake piston and front disc brake cylinder.


b.

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

CAUTION:
C344519

·

Do not hold the front disc brake cylinder with any part of your hand between the front disc brake cylinder and front disc brake piston.

·

Do not place any part of your hand in front of the front disc brake piston when using compressed air as a severe injury may result.



NOTICE:

Do not allow any brake fluid to spatter.



Hide 2.REMOVE CYLINDER BOOT

a.
C369839C01
0.729,0.542 0.844,0.542 0.844,0.542 1.552,1.292 true 0.573,0.458 0.885,0.615 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.

NOTICE:

Be careful not to damage the front disc brake cylinder.



Hide 3.REMOVE PISTON SEAL

a.
C369841C01
1.677,1.167 2.302,1.792 2.302,1.792 2.396,1.792 true 2.438,1.719 2.75,1.875 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

a.

Remove the front disc brake bleeder plug cap from the front disc brake bleeder plug.


Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG

a.

Remove the front disc brake bleeder plug from the front disc brake cylinder.