Home › Audio / Visual / Telematics › TELEMATICS › COMMUNICATION TELEMATICS BOX › from 2019.02
RM33C0E _56 Audio / Visual / Telematics _078700 TELEMATICS _0388256 COMMUNICATION TELEMATICS BOX A

TELEMATICS  COMMUNICATION TELEMATICS BOX  REMOVAL  


PROCEDURE

Hide 1.REMOVE ROOF CONSOLE BOX ASSEMBLY

Hide 867E1 2.REMOVE COMMUNICATION TELEMATICS BOX

a.
E416258

Disconnect the connector.


b.
E416259

Remove the 4 screws.


c.

Disengage the 3 guides to remove the communication telematics box.


Hide 86713D 3.REMOVE MAYDAY WIRE

HINT:

Perform this procedure only when replacement of the mayday wire is necessary.


a.
E416260C01
1.646,1.313 2.167,1.135 true 2.188,1.042 2.406,1.24 0.219,0.198 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Disengage the clamp.


b.

Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the mayday wire as shown in the illustration.