Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE › from 2019.02
RM33C0E _58 Vehicle Interior _065464 HEATING / AIR CONDITIONING _0331707 REFRIGERANT LINE A

HEATING / AIR CONDITIONING  REFRIGERANT LINE  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 2.REMOVE PIPING CLAMP (for Suction Hose Sub-assembly Side)

a.

While pressing the end of the suction hose sub-assembly into the end of the suction pipe sub-assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

E373851C02
3.99,1.052 3.906,1.219 3.906,1.219 4.385,1.042 true 1,2.167 1,1.667 false 2.667,2.167 2.667,1.708 false 2.583,2.188 2.896,2.344 0.313,0.156 10 false *1 0.917,2.188 1.229,2.344 0.313,0.156 10 false *2 3.719,1.167 4.031,1.323 0.313,0.156 10 false *3 1.385,0.49 1.698,0.646 0.313,0.156 10 false *a
*1 Suction Pipe Sub-assembly *2 Suction Hose Sub-assembly
*3 Piping Clamp - -
*a Press In - -


NOTICE:
·

If any foreign matter is adhered to the connected parts, brush it off or use compressed air to remove it.

·

Make sure that fragments of the piping clamp do not enter the piping.




b.

Separate the suction hose sub-assembly.

NOTICE:

Remove off any foreign matter from the connecting parts of the suction hose sub-assembly and suction pipe sub-assembly.



c.

Remove the 2 O-rings from the suction hose sub-assembly.

NOTICE:

Seal the opening of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.



d.

Remove the piping clamp.


Hide 3.REMOVE PIPING CLAMP (for Air Conditioning Tube and Accessory Assembly Side)