Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2019.10
RM33C0E _51 Engine / Hybrid System _065422 A25A-FXS EMISSION CONTROL _0406276 DIFFERENTIAL PRESSURE SENSOR A

A25A-FXS EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89481B 2.REMOVE DIFFERENTIAL PRESSURE SENSOR

a.
A433653

Disconnect the differential pressure sensor connector.


b.
A433654

Slide the clip and disconnect the No. 1 vacuum transmitting pipe sub-assembly from the differential pressure sensor.


c.

Remove the nut and differential pressure sensor from the emission control valve bracket.


Hide 25715 3.REMOVE EMISSION CONTROL VALVE BRACKET

HINT:

Perform this procedure only when replacement of the emission control valve bracket is necessary.


a.
A433649

Remove the nut and emission control valve bracket from the fuel pump flange.