1.INSTALL AUXILIARY BATTERY
Install the auxiliary battery.
|
Install in this Direction |
Install the No. 3 battery clamp with the bolt.
Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.
Engage the 2 claws to close the battery terminal connector cover.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
64718C
3.INSTALL LUGGAGE TRIM SERVICE HOLE COVER
Engage the 2 claws and install the luggage trim service hole cover.