Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › GRILLE SHUTTER SYSTEM › from 2020.08
RM33C0E _59 Vehicle Exterior _065474 EXTERIOR PANELS / TRIM _0331705 GRILLE SHUTTER SYSTEM D

EXTERIOR PANELS / TRIM  GRILLE SHUTTER SYSTEM  SYSTEM DESCRIPTION  


GRILLE SHUTTER SYSTEM


a.

General description

The swing grille actuator assembly receives signals from the ECM via LIN communication. Based on these signals, the swing grille actuator assembly operates the radiator shutter sub-assembly.


b.

Control List

Control Description
Closing Operation Control When the grille shutter is open and the vehicle conditions are met, the grille shutter closes in order to improve fuel economy (reduce air resistance) and reduce engine warm up time.
Opening Operation Control When the grille shutter is closed and the vehicle conditions are met, the grille shutter opens to ensure radiator and engine cooling air.
Ignition Switch Off-linked Opening Operation Control When the ignition switch is turned off and the vehicle is stopped with the grille shutter closed, the grille shutter opens.
Snow Blockage Control Operation If the vehicle is driven in a cold environment where the grille shutter may be frozen and stuck closed, the malfunction threshold will be set higher than usual.
Retry Operation If a mechanical malfunction is detected during a grille shutter operation, the operation will be attempted again.