Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY) › from 2020.08
RM33C0E _51 Engine / Hybrid System _065433 HYBRID / BATTERY CONTROL _0331295 HYBRID CONTROL SYSTEM(for NICKEL METAL HYDRIDE BATTERY) C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM(for NICKEL METAL HYDRIDE BATTERY)  U010087  Lost Communication with ECM/PCM "A" Missing Message  U010487  Lost Communication with Cruise Control Module Missing Message  U011087  Lost Communication with Drive Motor Control Module "A" Missing Message  U012287  Lost Communication with Vehicle Dynamics Control Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015187  Lost Communication with Restraints Control Module Missing Message  U016487  Lost Communication with HVAC Control Module Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  U110787  Lost Communication with Power Management Module Missing Message  U117087  Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message  


DESCRIPTION

The hybrid vehicle control ECU assembly transmits and receives signals via CAN communication to and from the ECM, yaw rate sensor, skid control ECU assembly, power steering ECU assembly, main body ECU, airbag ECU assembly, and air conditioning amplifier assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
U010087 Lost Communication with ECM/PCM "A" Missing Message A CAN communication error between the ECM and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Comes on Master Warning Light:
Comes on
U010487 Lost Communication with Cruise Control Module Missing Message A CAN communication error between the cruise control module and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Does not come on
U011087 Lost Communication with Drive Motor Control Module "A" Missing Message A CAN communication error between the MG ECU and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Does not come on
U012987 Lost Communication with Brake System Control Module Missing Message A CAN communication error (V BUS) between the skid control ECU assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on
U014087 Lost Communication with Body Control Module Missing Message A CAN communication error between the main body ECU and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on
U015187 Lost Communication with Restraints Control Module Missing Message A CAN communication error between the airbag ECU assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on
U016487 Lost Communication with HVAC Control Module Missing Message A CAN communication error between the air conditioning amplifier assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Does not come on
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Does not come on
U110787 Lost Communication with Power Management Module Missing Message A CAN communication error between the certification ECU (smart key ECU assembly) and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on
U117087 Lost Communication with Brake System Control Module (Secondary CAN Line) Missing Message A CAN communication error between the skid control ECU assembly and hybrid vehicle control ECU assembly (CAN communication system malfunction) occurs
(1 trip detection logic)
CAN communication system Does not come on Master Warning Light:
Comes on

CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

Turn the power switch on (READY) and wait for 2 minutes or more.

7.

Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.




PROCEDURE

1.CHECK DTC OUTPUT
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Check for DTCs of all systems by following the prompts on the GTS screen.


d.

Check for DTCs.

Result:
Result Proceed to
Hybrid vehicle control ECU assembly outputs P253012. A
Hybrid vehicle control ECU assembly does not output P253012. B



e.

Turn the power switch off.



A

B