Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING UNIT › from 2021.02
RM33C0E _58 Vehicle Interior _065464 HEATING / AIR CONDITIONING _0331708 AIR CONDITIONING UNIT A

HEATING / AIR CONDITIONING  AIR CONDITIONING UNIT  REASSEMBLY  


PROCEDURE

Hide 88501 2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

a.
E365712

Install the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor to the upper heater case.


b.

Engage the clamp.


c.

Engage the 10 claws to install the upper heater case with No. 1 cooler evaporator sub-assembly to the lower heater case.

E365711


d.

Install the 2 screws.


Hide 88515 3.INSTALL COOLER EXPANSION VALVE

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent



b.

Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.



c.
E365710

Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 88899L 4.INSTALL GROMMET SUB-ASSEMBLY

a.
E365709

Install the grommet sub-assembly.


Hide 87107A 5.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

a.
E377334C01
0,0 0,0 false
V113147

Install in this Direction


Install the heater radiator unit sub-assembly as shown in the illustration.


Hide 87124B 6.INSTALL HEATER CLAMP

a.
E365612

Engage the 3 claws to install the heater clamp.


Hide 88897M 7.INSTALL HEATER PIPE GROMMET

a.
E365611C01
0.469,0.906 1.073,0.906 true 0.281,0.792 0.594,0.948 0.313,0.156 10 false *a
*a Reference Point


Install the heater pipe grommet as shown in the illustration.

NOTICE:

Install the heater pipe grommet with the arrow facing up.



Hide 87050E 8.INSTALL NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for 3 Zone Type)

a.

Align each gear on the air conditioning radiator assembly as shown in the illustration, and then check that the gears of the No. 3 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.

E366411C01
2.333,1.854 4.094,2.583 true 5.615,1.917 6.667,2.344 true 4.125,2.49 4.438,2.646 0.313,0.156 10 false *a 6.708,2.25 7.021,2.406 0.313,0.156 10 false *a
*a Reference Point - -



b.
E366410

Install the No. 3 air conditioning radiator damper servo sub-assembly with the 2 screws.


Hide 87050D 9.INSTALL NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

a.

for LHD:

i.
E365724C01
2.208,0.677 2.625,0.938 2.625,0.938 2.313,0.583 true 1.323,0.854 1.219,1.188 1.219,1.188 1.438,0.865 true 1.104,1.208 1.417,1.365 0.313,0.156 10 false *a 2.656,0.833 2.969,0.99 0.313,0.156 10 false *a
*a Reference Point


Using the reference points, install the No. 2 air conditioning radiator damper servo sub-assembly with the 2 screws.



b.

for RHD:

i.
E371396C02
2.385,2.375 2.938,2.219 2.938,2.219 2.448,2.49 true 2.948,2.104 3.26,2.26 0.313,0.156 10 false *a
*a Reference Point


Using the reference points, install the No. 2 air conditioning radiator damper servo sub-assembly with the 2 screws.



Hide 87050C 10.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

a.

Align each gear on the air conditioning radiator assembly as shown in the illustration, and then check that the gears of the No. 1 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.

E365721C01
2.333,1.667 4,1.198 4,1.198 3.021,2.042 true 5.25,1.75 4.615,0.917 4.615,0.917 6.427,1.479 true 4.021,1.063 4.333,1.219 0.313,0.156 10 false *a 4.417,0.781 4.729,0.938 0.313,0.156 10 false *a
*a Reference Point - -



b.
E365722C01
2.479,0.823 2.198,1.271 2.198,1.271 2.594,0.896 true 2.01,1.208 2.323,1.365 0.313,0.156 10 false *a
*a Reference Point


Using the reference points, install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.


Hide 88539J 11.INSTALL DRAIN COOLER HOSE

a.
E377332C01
2.25,2.917 2.5,2.583 true 2.583,2.573 3,2.917 true 2.135,2.917 2.302,3.083 0.167,0.167 10 true *a 2.896,2.917 3.063,3.083 0.167,0.167 10 true *b
*a Hose Notch
*b Rib


Align the hose notch with the rib as shown in the illustration and install the drain cooler hose.


Hide 87114B 12.INSTALL HEATER COVER

a.
E377326C01
0,0 0,0 false
V113147

Install in this Direction


Install the heater cover as shown in the illustration.


b.

Install the screw.


Hide 82210K 13.INSTALL AIR CONDITIONING HARNESS ASSEMBLY

a.

for LHD:

i.
E377324C02
0.271,1.24 0.542,1 false 0.146,1.281 0.469,1.552 0.323,0.271 12 false *A
*A for 3 Zone Type


Engage each clamp.


ii.

Connect each connector to install the air conditioning harness assembly.



b.

for RHD:

i.
E377352

Engage each clamp.


ii.

Connect each connector to install the air conditioning harness assembly.



Hide 88650N 14.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

a.

for LHD:

i.
E354673C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide to temporarily install the air conditioning amplifier assembly as shown in the illustration.


ii.

Install the air conditioning amplifier assembly with the screw.


iii.

Connect the connector.



b.

for RHD:

i.
E371379C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide to temporarily install the air conditioning amplifier assembly as shown in the illustration.


ii.

Install the air conditioning amplifier assembly with the screw.


iii.

Connect the connector.



Hide 87130D 15.INSTALL BLOWER ASSEMBLY

Hide 88897P 16.INSTALL ASPIRATOR

a.
E365713

Engage the 2 claws and guide to install the aspirator.


Hide 87211A 17.INSTALL NO. 2 AIR DUCT

a.
E365598

Engage the 3 claws.


b.

Install a new No. 2 air duct with the screw.


Hide 87201B 18.INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

a.
E458155

Engage the 4 claws to install the No. 2 air duct sub-assembly.


Hide 87201F 19.INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY

a.
E458154

Engage the 4 claws.


b.
E458153

Install the No. 3 air duct sub-assembly with the 2 screws.