Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SWITCH › from 2021.02
RM33C0E _56 Audio / Visual / Telematics _065452 PARK ASSIST / MONITORING _0461971 PANORAMIC VIEW MONITOR SWITCH A

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SWITCH  REMOVAL  


PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE

Hide 62112A 2.REMOVE COWL SIDE TRIM SUB-ASSEMBLY

Hide 62312B 3.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

Hide 55318C 4.REMOVE INSTRUMENT SIDE PANEL

Hide 55606 5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55436B 6.REMOVE NO. 2 METER HOOD CLUSTER

Hide 53601 7.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55302D 8.REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY

Hide 84721B 9.REMOVE PANORAMIC VIEW MONITOR SWITCH

a.

for LHD:

i.
E459827C01
1.604,0.896 2.552,0.469 true 2.625,0.375 2.938,0.531 0.313,0.156 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the panoramic view monitor switch as shown in the illustration.



b.

for RHD:

i.
E460508C02
1.031,0.375 1.583,0.875 true 0.833,0.281 1.146,0.479 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the panoramic view monitor switch as shown in the illustration.