Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR SEAT SIDE AIRBAG ASSEMBLY (for Reclining Seat Type) › from 2021.02
RM33C0E _58 Vehicle Interior _065460 SUPPLEMENTAL RESTRAINT SYSTEMS _0462234 REAR SEAT SIDE AIRBAG ASSEMBLY(for Reclining Seat Type) G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR SEAT SIDE AIRBAG ASSEMBLY(for Reclining Seat Type)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
B414102

Be sure to correctly follow the removal and installation procedures for the rear seat airbag assemblies.


PROCEDURE

Hide 73940A 1.INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the rear seat airbag assemblies installed to the vehicle.

HINT:

The defects are as follows:

·

Scratches, broken or frayed threads on the surface of the rear side seatback assembly around the rear seat airbag assemblies

·

Small cracks in the rear side seatback assembly around the rear seat airbag assemblies

·

Significant discoloration on the rear side seatback assembly around the rear seat airbag assemblies



OK:

No defects are found.


If any defects are found, replace the rear side seatback pad or rear side seatback cover sub-assembly with a new one.


Hide 73940A 2.INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the rear seat airbag assemblies removed from the vehicle.

HINT:

The defects are as follows:

·

Scratches, broken or frayed threads on the surface of the base fabric of the rear seat airbag assemblies

·

Marks from being dropped

·

Deformation of the installation surface of the rear seat airbag assemblies

·

Cracks or other damage to the wire harness or connector



OK:

No defects are found.


If any defects are found, replace the rear seat airbag assembly with a new one.