Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › from 2021.02
RM33C0E _58 Vehicle Interior _065466 INTERIOR PANELS / TRIM _0328285 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  DISASSEMBLY  


PROCEDURE

Hide 63342A 1.REMOVE NO. 2 ROOF SILENCER (for Normal Roof)

a.

Remove the No. 2 roof silencer.

B480153


Hide 63344A 2.REMOVE NO. 4 ROOF SILENCER (for Normal Roof)

a.

Remove the No. 4 roof silencer.

B480154


Hide 86101J 3.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 82171 4.REMOVE NO. 1 ROOF WIRE (for Normal Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B481816C01
0.167,0.177 0.542,0.417 0.375,0.24 12 false *A 0.167,3.177 0.542,3.417 0.375,0.24 12 false *B
*A w/ Room Light Assembly *B w/ Spot Light Assembly
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B521170C01
2.688,1.677 3.354,1.188 3.354,1.188 2.625,1.563 true 2.656,4.271 3.375,3.979 true 0.083,0.25 0.5,0.667 0.417,0.417 12 false *A 0.083,3.146 0.51,3.5 0.427,0.354 12 false *B 1.542,1.229 1.729,1.406 0.188,0.177 10 true *a 1.542,4.073 1.729,4.25 0.188,0.177 10 true *a 3.375,1.073 3.646,1.281 0.271,0.208 12 true *C 3.385,3.885 3.656,4.094 0.271,0.208 12 true *D
*A w/ Room Light Assembly *B w/ Spot Light Assembly
*C w/ EC Mirror or Pre-collision System *D for LHD with Rain Sensor
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 5.REMOVE NO. 1 ROOF WIRE (for Moon Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B490030C01
0,0 0,0 false
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B490031C01
2.708,1.833 3.406,1.542 true 3.427,1.417 3.854,1.76 0.427,0.344 12 false *A 1.583,1.646 1.771,1.854 0.188,0.208 10 true *a
*A for LHD with Rain Sensor - -
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.


Hide 82171 6.REMOVE NO. 1 ROOF WIRE (for Panoramic Moon Roof)

a.

Remove the adhesive tape from the roof headlining assembly.

B484969C01
0,0 0,0 false
V100155

Adhesive Tape - -



b.

Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

B484970C01
2.927,1.927 3.448,1.625 true 3.469,1.479 3.844,1.719 0.375,0.24 12 false *A 1.802,1.771 2.01,1.969 0.208,0.198 10 true *a
*A for LHD with Rain Sensor - -
*a 90° - -
V113147

Rotation Direction - -



c.

Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.