87510P
1.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (LH)
| *a | Component without harness connected
(Rear Seat Cushion Heater Assembly (LH)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| D-4 - E-1 | Always | Below 1 Ω |
| D-3 - D-1 | Seat heater temperature 20 °C (68 °F) | 1.34 to 1.60 Ω |
| D-3 - D-2 | Seat heater temperature 20 °C (68 °F) | 2.43 to 2.91 Ω |
| D-5 - E-2 | Always | Below 1 Ω |
If the result is not as specified, replace the rear seat cushion heater assembly (LH).
87510Q
2.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (RH)
| *a | Component without harness connected
(Rear Seat Cushion Heater Assembly (RH)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F-1 - G-1 | Seat heater temperature 20 °C (68 °F) | Below 1 Ω |
| F-2 - G-2 | Seat heater temperature 20 °C (68 °F) | 2.43 to 2.91 Ω |
| F-2 - G-3 | Seat heater temperature 20 °C (68 °F) | 1.34 to 1.60 Ω |
If the result is not as specified, replace the rear seat cushion heater assembly (RH).