The meter mirror sub-assembly communicates with each ECU via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| U010087 | Lost Communication With ECM/PCM "A" Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: ·
No communication with ECM Malfunction Time: 3.6 seconds or more |
·
ECM ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U012987 | Lost Communication With Brake System Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with skid control ECU (brake booster with master cylinder assembly) Malfunction Time: 3.6 seconds or more |
·
Skid control ECU (Brake booster with master cylinder assembly) ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U014087 | Lost Communication with Body Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with main body ECU (multiplex network body ECU) Malfunction Time: 5.0 seconds or more |
·
Main body ECU (Multiplex network body ECU) ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with combination meter assembly Malfunction Time: 5.0 seconds or more |
·
Combination meter assembly ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U016387 | Lost Communication with Navigation Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with radio and display receiver assembly Malfunction Time: 5.0 seconds or more |
·
Radio and display receiver assembly ·
CAN communication system ·
Meter mirror sub-assembly |
w/ Radio and Display Receiver Assembly |
| U016487 | Lost Communication with HVAC Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with air conditioning amplifier assembly Malfunction Time: 5.0 seconds or more |
·
Air conditioning amplifier assembly ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U023A87 | Lost Communication with Image Processing Module "A" Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with forward recognition camera Malfunction Time: 5.0 seconds or more |
·
Forward recognition camera ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U029387 | Lost Communication With Hybrid Powertrain Control Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with hybrid vehicle control ECU assembly Malfunction Time: 3.6 seconds or more |
·
Hybrid vehicle control ECU assembly ·
CAN communication system ·
Meter mirror sub-assembly |
- |
| U111087 | Lost Communication with Intuitive Parking Assist Module Missing Message | Diagnosis Condition:
·
The power switch is on (IG) ·
IG power source voltage is 9.5 V or more Malfunction Status: No communication with clearance warning ECU assembly Malfunction Time: 5.0 seconds or more |
·
Clearance warning ECU assembly ·
CAN communication system ·
Meter mirror sub-assembly |
- |
Check for DTCs are output.
| Proceed to |
|---|
| NEXT |
NEXT
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING