Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for LH Side) › from 2021.02
RM33C0E _58 Vehicle Interior _065463 SEAT BELT _0332570 REAR SEAT INNER BELT ASSEMBLY(for LH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.

Inspect the rear seat inner with center belt assembly LH (for LH).

i.
B345488C04
0.125,0.125 0.438,0.323 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for LH))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 - 4 Rear LH seat belt unfastened Below 1 Ω
Rear LH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.



b.

Inspect the rear seat inner with center belt assembly LH (for center).

i.
B471746C01
0.094,0.083 0.406,0.281 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for Center))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Rear center seat belt unfastened Below 1 Ω
Rear center seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.