Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for RH Side) › from 2021.02
RM33C0E _58 Vehicle Interior _065463 SEAT BELT _0332571 REAR SEAT INNER BELT ASSEMBLY(for RH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for RH Side)  INSPECTION  


PROCEDURE

Hide 73230 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

B345488C05
0.146,0.125 0.458,0.323 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly RH)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 - 4 Rear RH seat belt unfastened Below 1 Ω
Rear RH seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly RH.