The hybrid vehicle control ECU assembly communicates with each sensor and ECU via CAN communication.
If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U010487 | Lost Communication with Cruise Control Module Missing Message | When the power switch is on (IG) and the dynamic radar cruise control system is operating, a communication malfunction between the forward recognition camera and hybrid vehicle control ECU assembly is detected for approximately 1 second or more. | CAN communication system | Cruise Control |
| U012287 | Lost Communication with Vehicle Dynamics Control Module Missing Message | When the power switch is on (IG) and the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake booster with master cylinder assembly) and hybrid vehicle control ECU assembly is detected for approximately 3 seconds or more. | CAN communication system | Cruise Control |
| U029387 | Lost Communication with Hybrid/EV Powertrain Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake booster with master cylinder assembly) and hybrid vehicle control ECU assembly is detected for approximately 1 second or more. | CAN communication system | Cruise Control |
Clear the DTCs.
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| CAN communication system DTC is not output | A |
| CAN communication system DTC is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING