Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM › from 2021.02
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0383394 ROAD SIGN ASSIST SYSTEM D

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE ROAD SIGN ASSIST SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the multi-information display

i.

Turn the power switch to on (IG).


ii.

Select the setting by referring to the table below.


iii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.


Road Sign Assist Setup
Display Description Setting Default Relevant ECU

*1: Display contents differ depending on the country.

*2: The set vehicle speed differs depending on the country or area.

RSA Road sign assist function setting On / Off On Forward recognition camera
Notification Method*1 Above Speed Limit Excess speed notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Overtaking Overtaking prohibition notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Others Other notification method setting No Notification / Only Visual / Visual & Audio Only Visual Forward recognition camera
Notification Level Excess speed notification level setting*2 10 km/h (5 MPH) / 5 km/h (3 MPH) / 2 km/h (1 MPH) 2 km/h (1 MPH) Forward recognition camera
5 km/h / 3 km/h / 1 km/h 1 km/h