Home › Engine / Hybrid System › CRUISE CONTROL › FRONT RADAR SENSOR SYSTEM › from 2021.02
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0465301 FRONT RADAR SENSOR SYSTEM U

CRUISE CONTROL  FRONT RADAR SENSOR SYSTEM  TERMINALS OF ECU  


CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the millimeter wave radar sensor assembly connector.



A402620N41
3.365,0.063 3.792,0.302 0.427,0.24 3.479,0.104 3.938,0.302 0.458,0.198 10 false A30

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A30-8 (IGB) - A30-1 (SGND) B - W-B Power source Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
A30-1 (SGND) - Body ground W-B - Body ground Ground Always Below 1 Ω