Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2021.02
RM33C0E _58 Vehicle Interior _065461 PRE-COLLISION _0332154 PRE-COLLISION SYSTEM W

PRE-COLLISION  PRE-COLLISION SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PRE-COLLISION SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the Multi-information Display

i.

Turn the power switch on (IG).


ii.

Select the setting by referring to the table below.


iii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.


Pre-collision System Settings
Display Description Setting Default
PCS Turns the pre-collision system function on/off. ON/OFF ON
Sensitivity Sets the pre-collision system function warning sensitivity Early/Middle/Late Middle



b.

Customizing with the GTS

i.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
PCS Function ON/OFF State Stored Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 1 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 2 Refer to the table below Stored $00:Not Stored,$01:Stored Forward recognition camera
PCS Warning Timing State Stored 3 Refer to the table below Not Stored $00:Not Stored,$01:Stored Forward recognition camera
50006 98
Measurement Item
Customize Setting Description Setting
PCS Function ON/OFF State Stored Function to maintain the pre-collision system on/off setting when the power switch is turned on (IG) from off. Not stored: Pre-collision system always turns on
Stored: Pre-collision system maintains previous setting
PCS Warning Timing State Stored 1 Function to set whether or not to store the warning sensitivity setting when the PCS function is turned from off to on while the power switch is on (IG). Not stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 2 Function to set whether or not to store the warning sensitivity setting when the PCS function is on and the power switch is turned from off to on (IG). Not stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value
PCS Warning Timing State Stored 3 Function to set whether or not to store the warning sensitivity setting when the PCS function is off and the power switch is turned from off to on (IG). Not stored: Sensitivity setting is reset to Middle
Stored: Sensitivity settings are maintained as previous value