CHECK FOR DTC (MAIN BODY)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check for DTCs.
CHECK FOR DTC (HL AUTOLEVELING)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Check for DTCs.
CHECK FOR DTC (HL AUTOLEVELING (SUB))
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.
Check for DTCs.
CHECK FOR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL)) (w/ Automatic High Beam System)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
Check for DTCs.
CLEAR DTC (MAIN BODY)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.
CLEAR DTC (HL AUTOLEVELING)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Clear the DTCs.
CLEAR DTC (HL AUTOLEVELING (SUB))
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.
Clear the DTCs.
CLEAR DTC (FRONT RECOGNITION CAMERA (FRONT LIGHTING CONTROL)) (w/ Automatic High Beam System)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.
Clear the DTCs.