Risk of explosion if the battery is replaced by an incorrect type. Replace battery with the same type.
Risk of explosion or the leakage of flammable liquid or gas.
Do not use in /store in /bring into environment of extremely high temperature or extremely low pressure due to the very high altitude.
Do not attempt to burn, crush, or cut used battery.
86725
1.INSTALL MOBILEPHONE BATTERY
|
Install in this Direction |
Install the mobilephone battery as shown in the illustration.
Make sure that the mobilephone battery is securely installed.
Connect the connector.
Make sure that the connector is connected securely.
Engage the 4 claws to install the transceiver cover.
Make sure that the transceiver cover is securely installed.
2.INSTALL TELEMATICS TRANSCEIVER WITH BRACKET
3.PERFORM INITIALIZATION (for eCall)
4.PERFORM INITIALIZATION (for Toyota Connected Services)