Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM › from 2022.01
RM33C0E _51 Engine / Hybrid System _065434 CRUISE CONTROL _0465299 FRONT CAMERA SYSTEM U

CRUISE CONTROL  FRONT CAMERA SYSTEM  TERMINALS OF ECU  


CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the forward recognition camera connector.



a.
B472992N65
2.073,0.833 2.458,1.042 0.385,0.208 2.135,0.865 2.448,1.063 0.313,0.198 10 false V24

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
V24-1 (HTR) - V24-10 (GND) LA-B - LA*1
LA-B - W-B*2
Forward recognition hood operation signal Power switch on (IG), forward recognition hood not operating 11 to 14 V
Power switch on (IG), forward recognition hood operating Below 1 V
V24-7 (IGB) - V24-10 (GND) LA-P - LA*1
LA-P - W-B*2
Power source Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
V24-10 (GND) - Body ground LA - Body ground*1
W-B - Body ground*2
Ground Always Below 1 Ω

*1: Through No. 29 Junction Connector

*2: Not through No. 29 Junction Connector