Home › Vehicle Exterior › BODY DIMENSIONS › FRAME › 2017.01–2019.08
BM2850E _01 Vehicle Exterior _075894 BODY DIMENSIONS _0369053 FRAME F

BODY DIMENSIONS  FRAME  TWO-DIMENSIONAL DISTANCE  


for Standard Body (for Rigid Mount)


a.

exept LPG

i.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D, d Body Mounting Hole 18X16
(0.71X0.63)
E, e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole 18X16
(0.71X0.63)
G, g Body Mounting Hole 18X16
(0.71X0.63)
H, h Body Mounting Hole φ11 (0.43)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148343C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.49,0.083 3.802,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148344C02
0.76,4.302 1.073,4.458 0.313,0.156 10 false *a 0.469,5.313 0.781,5.469 0.313,0.156 10 false *b 0.25,8.427 0.563,8.583 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



ii.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Rear Spring Front Shackle Hole φ16 (0.63)
F, f Bumper Stopper Installation Hole φ11 (0.43)
G, g Rear Spring Rear Shackle Hole φ40 (1.57)
H, h Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148345C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.479,0.083 3.792,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148346C04
0.76,4.292 1.073,4.448 0.313,0.156 10 false *a 0.417,5.323 0.729,5.479 0.313,0.156 10 false *b 0.188,8.427 0.5,8.583 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -




b.

for LPG

i.

Upper Face

HINT:
·

Point E, e, on the vehicle are asymmetrical.

·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D, d Body Mounting Hole 18X16
(0.71X0.63)
E Body Mounting Nut M10 (0.39)
e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole 18X16
(0.71X0.63)
G, g Body Mounting Hole 18X16
(0.71X0.63)
H, h Body Mounting Hole φ11 (0.43)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148016C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.479,0.083 3.792,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148017C01
0.729,3.917 1.042,4.073 0.313,0.156 10 false *a 1.729,4.885 2.042,5.042 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



ii.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Rear Spring Front Shackle Hole φ16 (0.63)
F, f Bumper Stopper Installation Hole φ11 (0.43)
G, g Rear Spring Rear Shackle Hole φ40 (1.57)
H, h Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148018C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.479,0.083 3.792,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148346C05
0.76,4.292 1.073,4.448 0.313,0.156 10 false *a 0.448,5.292 0.76,5.448 0.313,0.156 10 false *b 0.135,8.552 0.448,8.708 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -





for Standard Body (for Rubber Mount)


a.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D, d Body Mounting Hole 18X16
(0.71X0.63)
E, e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole φ51 (2.01)
G, g Body Mounting Hole φ51 (2.01)
H, h Body Mounting Hole φ51 (2.01)
J, j Body Mounting Hole φ51 (2.01)
K, k Body Mounting Hole φ51 (2.01)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148019C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.479,0.083 3.792,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148020C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.583,4.729 1.896,4.885 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Distance between points other than those above
*c mm
(in.)
- -



b.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Rear Spring Front Shackle Hole φ16 (0.63)
F, f Bumper Stopper Installation Hole φ11 (0.43)
G, g Rear Spring Rear Shackle Hole φ40 (1.57)
H, h Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3200 mm (125.98 in.)

K148021C01
2.76,0.604 3.073,0.76 0.313,0.156 10 false *A 4.198,0.615 4.51,0.771 0.313,0.156 10 false *B 3.479,0.083 3.792,0.24 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148022C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 0.417,4.74 0.729,4.896 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Distance between points other than those above
*c mm
(in.)
- -




for Long Body (for Rigid Mount)


a.

exept LPG

i.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D, d Body Mounting Hole 18X16
(0.71X0.63)
E, e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole 18X16
(0.71X0.63)
G, g Body Mounting Hole 18X16
(0.71X0.63)
H, h Body Mounting Hole 18X16
(0.71X0.63)
J, j Body Mounting Hole φ11 (0.43)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148347C01
2.76,0.427 3.073,0.583 0.313,0.156 10 false *A 4.208,0.438 4.521,0.594 0.313,0.156 10 false *B 3.458,0.042 3.771,0.198 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148348C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.615,4.719 1.927,4.875 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



ii.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Crossmember No. 5 Installation Hole φ11 (0.43)
F, f Rear Spring Front Shackle Hole φ16 (0.63)
G, g Bumper Stopper Installation Hole φ11 (0.43)
H, h Rear Spring Rear Shackle Hole φ40 (1.57)
J, j Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148349C01
2.76,0.396 3.073,0.552 0.313,0.156 10 false *A 4.208,0.406 4.521,0.563 0.313,0.156 10 false *B 3.469,0.021 3.781,0.177 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148350C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.615,4.719 1.927,4.875 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -




b.

for LPG

i.

Upper Face

HINT:
·

Point F, f, on the vehicle are asymmetrical.

·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D Body Mounting Nut M10 (0.39)
d Body Mounting Hole 18X16
(0.71X0.63)
E Body Mounting Nut M10 (0.39)
e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole 18X16
(0.71X0.63)
G, g Body Mounting Hole 18X16
(0.71X0.63)
H, h Body Mounting Hole 18X16
(0.71X0.63)
J, j Body Mounting Hole φ11 (0.43)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148023C01
2.76,0.396 3.073,0.552 0.313,0.156 10 false *A 4.208,0.406 4.521,0.563 0.313,0.156 10 false *B 3.469,0.021 3.781,0.177 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148348C02
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.615,4.719 1.927,4.875 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



ii.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Crossmember No. 5 Installation Hole φ11 (0.43)
F, f Rear Spring Front Shackle Hole φ16 (0.63)
G, g Bumper Stopper Installation Hole φ11 (0.43)
H, h Rear Spring Rear Shackle Hole φ40 (1.57)
J, j Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148024C01
2.76,0.396 3.073,0.552 0.313,0.156 10 false *A 4.208,0.406 4.521,0.563 0.313,0.156 10 false *B 3.469,0.021 3.781,0.177 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148351C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.615,4.719 1.927,4.875 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -





for Long Body (for Rubber Mount)


a.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ13 (0.51)
B, b Shock Absorber Installation Hole φ23.6 (0.93)
C, c Body Mounting Hole 18X16
(0.71X0.63)
D, d Body Mounting Hole 18X16
(0.71X0.63)
E, e Body Mounting Hole 18X16
(0.71X0.63)
F, f Body Mounting Hole 18X16
(0.71X0.63)
G, g Body Mounting Hole φ51 (2.01)
H, h Body Mounting Hole φ51 (2.01)
J, j Body Mounting Hole φ51 (2.01)
K, k Body Mounting Hole φ51 (2.01)
L, l Body Mounting Hole φ51 (2.01)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148352C01
2.76,0.448 3.073,0.604 0.313,0.156 10 false *A 4.208,0.469 4.521,0.625 0.313,0.156 10 false *B 3.469,0.021 3.781,0.177 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148353C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.208,4.75 1.521,4.906 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



b.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Engine Under Cover Bracket Installation Nut M8 (0.31)
B, b Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
C, c Suspension Lower Arm Installation Hole 40X18.5
(1.57X0.73)
D, d Crossmember No. 4 Installation Hole φ11 (0.43)
E, e Crossmember No. 5 Installation Hole φ11 (0.43)
F, f Rear Spring Front Shackle Hole φ16 (0.63)
G, g Bumper Stopper Installation Hole φ11 (0.43)
H, h Rear Spring Rear Shackle Hole φ40 (1.57)
J, j Side Rail Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3935 mm (154.92 in.)

K148354C01
2.76,0.417 3.073,0.573 0.313,0.156 10 false *A 4.208,0.427 4.521,0.583 0.313,0.156 10 false *B 3.469,0.021 3.781,0.177 0.313,0.156 10 false *C 0.115,8.625 0.427,8.781 0.313,0.156 10 false *a
*A LH *B RH
*C Front - -
*a mm
(in.)
- -


K148355C01
0.74,3.708 1.052,3.865 0.313,0.156 10 false *a 1.594,4.75 1.906,4.906 0.313,0.156 10 false *b 0.115,8.625 0.427,8.781 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -