Home › Vehicle Exterior › BODY PANEL › SIDE PANEL NO.2 RH (for RHD) › 2017.01–2019.08
BM2850E _01 Vehicle Exterior _075893 BODY PANEL _0369060 SIDE PANEL NO.2 RH(for RHD) F

BODY PANEL  SIDE PANEL NO.2 RH(for RHD)  ASSEMBLY REPLACEMENT  


K139869

REMOVAL



Symbol Meaning
K108818

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

REMOVAL POINT
1.

*a in illustration above indicates where the adhesive is located.

2.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.



K146155C02
3.938,8.208 3.719,6.917 false 3.948,8.208 4.073,6.906 false 3.958,8.198 4.385,6.917 false 3.938,8.208 4.177,8.208 false 0.354,0.406 0.667,0.563 0.313,0.156 10 false *A 0.219,8.563 0.531,8.719 0.313,0.156 10 false *b 3.823,1.385 4.573,1.583 0.75,0.198 10 false 185 (7.28) 4.229,8.146 4.542,8.344 0.313,0.198 10 false *a
*A for Standard Body - -
*b mm (in.) - -


K146156C02
3.719,7.354 2.969,6.115 false 3.719,7.365 3.292,6.104 false 3.729,7.344 3.573,6.104 false 3.729,7.354 3.865,6.104 false 3.729,7.354 4.156,6.104 false 3.729,7.354 4.448,6.104 false 3.708,7.365 4,7.365 false 0.302,0.188 0.615,0.344 0.313,0.156 10 false *A 0.198,8.583 0.51,8.74 0.313,0.156 10 false *b 4.406,0.563 5.063,0.781 0.656,0.219 10 false 185 (7.28) 4.042,7.292 4.354,7.448 0.313,0.156 10 false *a
*A for Long Body - -
*b mm (in.) - -


K146157

INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108827

Cut and Join Location
K108830

Fillet Weld
K108831

Butt Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


3.

Before temporarily installing the new parts, weld the rear body panel front and emergency step base with the standard number of welding points. (w/ Emergency Step)

4.

*a Dent one part about 1 to 2 mm (0.04 to 0.08 in.).

5.

Before installing a new part, apply body sealer.

HINT:
·

Apply body sealer evenly about 5 mm (0.20 in.) from the flange, avoiding any oozing.

·

Apply body sealer evenly, about 3 to 4 mm (0.12 to 0.16 in.) in diameter.



6.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115) to the area indicated by *b in the illustration.

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



7.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

8.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K147954C01
5.281,4.167 5.01,2.99 5.01,2.99 5.177,2.99 false 1.177,4.99 0.656,7.229 0.656,7.229 0.823,7.229 false 3.229,4.365 2.708,6.604 2.708,6.604 2.875,6.604 false 0.229,0.219 0.542,0.417 0.313,0.198 10 false *A 0.865,7.135 1.177,7.333 0.313,0.198 10 false *1 5.24,2.906 5.552,3.104 0.313,0.198 10 false *2 2.938,6.51 3.25,6.708 0.313,0.198 10 false *2
*A w/ Emergency Step - -
*1 REAR BODY PANEL FRONT *2 EMERGENCY STEP BASE


K146158C04
3.563,8.458 4.417,7.333 4.417,7.333 4.583,7.333 false 3.583,7.719 4.417,7.333 false 0.208,0.125 0.521,0.281 0.313,0.156 10 false *A 0.177,8.573 0.49,8.729 0.313,0.156 10 false *c 2.833,0.271 3.448,0.49 0.615,0.219 10 false 15 (0.59) 4.646,7.26 4.958,7.458 0.313,0.198 10 false *a 2,1.469 2.615,1.688 0.615,0.219 10 false 15 (0.59) 5.667,2.135 6.281,2.354 0.615,0.219 10 false 15 (0.59) 4.75,2.781 5.365,3 0.615,0.219 10 false 15 (0.59) 4.865,3.865 5.479,4.083 0.615,0.219 10 false 15 (0.59) 1.906,5.677 2.521,5.896 0.615,0.219 10 false 15 (0.59) 2.938,6.333 3.552,6.552 0.615,0.219 10 false 15 (0.59)
*A for Standard Body - -
*c mm (in.) - -


K146159C04
2.615,1.031 1.927,0.5 1.927,0.5 1.708,0.5 false 4,5.49 3.75,4.313 false 4,5.49 4.073,4.323 false 4.167,5.5 4,5.5 4,5.5 4.385,4.323 false 0.292,0.104 0.604,0.26 0.313,0.156 10 false *A 1.542,0.438 1.854,0.594 0.313,0.156 10 false *1 0.219,8.51 0.531,8.667 0.313,0.156 10 false *c 4.281,5.406 4.594,5.563 0.313,0.156 10 false *b 2.823,6.76 3.365,6.958 0.542,0.198 10 false 5 (0.20)
*A for Standard Body - -
*1 REAR BODY PANEL FRONT - -
*c mm (in.) - -


K146160C01
0.24,0.146 0.552,0.302 0.313,0.156 10 false *A
*A for Standard Body - -


K146161C02
2.521,6.771 2.729,6.771 2.729,6.771 3.698,7.323 false 1.115,7.292 1.313,7.292 1.313,7.292 1.802,7.698 false 5.344,7.156 5.188,7.156 5.188,7.156 4.833,7.417 false 5.521,6.708 5.344,6.708 5.344,6.708 4.438,6.917 false 5.646,8.042 5.49,8.042 5.49,8.042 5.188,7.76 false 2.24,8.031 2.438,8.031 2.438,8.031 2.927,8.438 false 1.396,8.031 1.552,8.031 1.552,8.031 1.948,7.771 false 4.75,8.167 4.583,8.167 4.583,8.167 4.208,8.542 false 0.229,0.052 0.542,0.208 0.313,0.156 10 false *A 5.375,7.094 5.688,7.25 0.313,0.156 10 false *2 5.688,7.979 6,8.135 0.313,0.156 10 false *3 2.333,6.708 2.646,6.865 0.313,0.156 10 false *4 0.948,7.24 1.26,7.396 0.313,0.156 10 false *5 1.219,7.969 1.531,8.125 0.313,0.156 10 false *6 1.063,8.396 1.375,8.552 0.313,0.156 10 false *7 0.042,8.688 0.354,8.844 0.313,0.156 10 false *c 5.573,6.656 5.885,6.813 0.313,0.156 10 false *1 4.792,8.115 5.104,8.271 0.313,0.156 10 false *2 2.083,7.969 2.396,8.125 0.313,0.156 10 false *5 5.417,3.719 6.01,3.938 0.594,0.219 10 false 5 (0.20) 5.406,5.375 6,5.594 0.594,0.219 10 false 5 (0.20)
*A for Standard Body - -
*1 Fillet Weld *2 Putty
*3 Vehicle Side Panel *4 Plug Weld
*5 Reference Surface *6 New Panel
*7 Cross Section Illustration - -
*c mm (in.) - -


K146162C04
3.583,7.677 4.333,7.167 false 3.583,8.49 4.333,7.167 4.333,7.167 4.5,7.167 false 0.198,0.115 0.51,0.271 0.313,0.156 10 false *A 0.177,8.615 0.49,8.771 0.313,0.156 10 false *c 2.802,0.271 3.448,0.469 0.646,0.198 10 false 15 (0.59) 4.583,7.104 4.896,7.302 0.313,0.198 10 false *a 1.969,1.479 2.615,1.677 0.646,0.198 10 false 15 (0.59) 5.677,2.146 6.323,2.344 0.646,0.198 10 false 15 (0.59) 4.75,2.792 5.396,2.99 0.646,0.198 10 false 15 (0.59) 4.875,3.875 5.521,4.073 0.646,0.198 10 false 15 (0.59) 1.896,5.688 2.542,5.885 0.646,0.198 10 false 15 (0.59) 2.948,6.354 3.594,6.552 0.646,0.198 10 false 15 (0.59)
*A for Long Body - -
*c mm (in.) - -


K146163C04
2.573,1.01 2.063,0.542 2.063,0.542 1.875,0.542 false 3.833,5.667 2.958,4.365 false 3.833,5.667 3.292,4.333 false 3.833,5.667 3.573,4.365 false 3.833,5.667 4.156,4.354 false 4,5.667 3.833,5.667 3.833,5.667 3.885,4.365 false 3.833,5.667 4.427,4.365 false 0.198,0.177 0.51,0.333 0.313,0.156 10 false *A 1.729,0.469 2.042,0.625 0.313,0.156 10 false *1 0.219,8.594 0.531,8.75 0.313,0.156 10 false *c 2.833,6.792 3.354,7.021 0.521,0.229 10 false 5 (0.20) 4.073,5.604 4.385,5.802 0.313,0.198 10 false *b
*A for Long Body - -
*1 REAR BODY PANEL FRONT - -
*c mm (in.) - -


K146164C01
0.198,0.219 0.51,0.375 0.313,0.156 10 false *A
*A for Long Body - -


K146165C02
4.396,6.896 5.229,6.719 5.229,6.719 5.406,6.719 false 4.729,7.385 5.208,7.115 5.208,7.115 5.344,7.115 false 5.333,7.74 5.667,8 5.667,8 5.802,8 false 1.802,7.75 1.583,8.031 1.583,8.031 1.427,8.031 false 4.333,8.5 4.792,8.156 4.792,8.156 4.938,8.156 false 2.813,8.417 2.625,8 2.625,8 2.469,8 false 1.521,7.677 1.333,7.26 1.333,7.26 1.177,7.26 false 3.698,7.292 2.583,6.792 2.583,6.792 2.427,6.792 false 0.156,0.104 0.469,0.26 0.313,0.156 10 false *A 5.448,6.656 5.76,6.813 0.313,0.156 10 false *1 5.396,7.063 5.708,7.219 0.313,0.156 10 false *2 5.844,7.938 6.156,8.094 0.313,0.156 10 false *3 2.25,6.729 2.563,6.885 0.313,0.156 10 false *4 1.01,7.198 1.323,7.354 0.313,0.156 10 false *5 1.26,7.958 1.573,8.115 0.313,0.156 10 false *6 1.042,8.406 1.354,8.563 0.313,0.156 10 false *7 0.052,8.688 0.365,8.844 0.313,0.156 10 false *c 5.438,3.708 5.958,3.938 0.521,0.229 10 false 5 (0.20) 4.979,8.104 5.292,8.26 0.313,0.156 10 false *2 2.302,7.927 2.615,8.083 0.313,0.156 10 false *5 5.438,5.333 5.958,5.563 0.521,0.229 10 false 5 (0.20)
*A for Long Body - -
*1 Fillet Weld *2 Putty
*3 Vehicle Side Panel *4 Plug Weld
*5 Reference Surface *6 New Panel
*7 Cross Section Illustration - -
*c mm (in.) - -


K146166